Hi Jonathan, thank you for your response. I am familiar with TMF653 already, but I was not sure if I should stress it to match our current needs or perhaps there was another higher level api we could use instead.
We are currently trying to frame the tests of every service provided for a single Customer Location into a single API call. At the same time, we also need to provide diagnosis. This API call should for example be triggered from an IVR before handing over to a CC representative and should give an overall pass/fail check on each service provided to the customer.
For the sake of it, let's call it CustomerLocationServiceTest.
CustomerLocationServiceTest:
Request:
- Device1
- Service 1.1
- Service 1.2
- Device 2
- Service 2.1
- Service 2.2
Response:
- Device1
- Service 1.1
- ServiceTest: {}
- Diagnostic: Ok
- Service 1.2
- ServiceTest: {}
- Diagnostic: Failed
- Device 2
- Service 2.1
- ServiceTest: {}
- Diagnostic: Ok
- Service 2.2
- ServiceTest: {}
- Diagnostic: Ok
TMF653, afaik, is focused into testing a single service, and while it offers the capability of signaling out-of-range test measurements, it seems lacking an overall diagnostic block.
Of course, all of that could be achieved through extension and bulk patterns. My main concern is not "breaking the spirit" of TMF653 by doing so.
------------------------------
Martín Cortina
Telecom Argentina, S.A.
------------------------------
Original Message:
Sent: Feb 22, 2020 13:37
From: Jonathan Goldberg
Subject: Api for service test diagnostics
Hi Martin.
Perhaps Service Test (TMF653) would meet your needs?
You'll find the R18.5 version in the Open API table at https://projects.tmforum.org/wiki/display/API/Open+API+Table
Hope it helps
------------------------------
Jonathan Goldberg
Amdocs Management Limited
Any opinions and statements made by me on this forum are purely personal, and do not necessarily reflect the position of the TM Forum or my employer.
Original Message:
Sent: Feb 21, 2020 13:57
From: Martín Cortina
Subject: Api for service test diagnostics
Hi All!
We're looking for an TMF API what not only allows to get test measurements of an specific service but allow to test multiple services of a specific customer and provide diagnostics.
Overall, that would look like an object containing service test measurements of an array of services and a single diagnostic block.
I tried stressing the TMF656 service problem api but it did not seem to fit. So far my best try was making a bulk request of TMF653 containing an additional diagnostic block.
Would you please point me into the right direction?
Thank you very much in advance
------------------------------
Martín Cortina
Telecom Argentina, S.A.
------------------------------